Numerical control lathe to normal use, the 4 points, not missing

CNC lathe equipment normal use is necessary to satisfied the following conditions, the machine is a prescription of the power supply voltage is small, the environment temperature taken in less than 30 degrees, relative humidity is less than 80%. 1, general CNC lathe equipment power requirement in the machining workshop, not only environmental temperature change is big, poor use condition, and a variety of mechanical and electrical equipment, the power grid to shake. Therefore, device orientation of the numerical control lathe, with strict control demand supply voltage. Power supply voltage shake is necessary within the allowed size, and adhere to the relatively stable. Otherwise it will affect the numerical control system's normal operation. 2, environmental requirements, the orientation of the machine tool should be far away from the source, should prevent sun direct illuminate, and the influence of thermal radiation, prevent moisture and the influence of the air. Near the source such as machine tools, the machine should be set up around the antivibration ditch. Otherwise will directly affect the machining accuracy and stability of the machine tool, makes the electronic components poor contact, seizures, influence on the reliability of the machine tool. 3 users in the use of machine tools, machine tool, the standard is not allowed to change the parameters of the control system within the factory setting. Set these parameters directly related to the dynamic characteristics of machine parts. Only gap compensation parameter values can be adjusted according to the practical situation. User can't replace machine accessories, such as use beyond the specification of the hydraulic chuck. Factory in setting up attachment, energetic considering the link parameters matching. Blind to replace form the link parameters do not match, and even form the disturbance estimate less than. Using hydraulic chuck, hydraulic head and tailstock, hydraulic oil cylinder pressure, should be within the allowable stress scale, does not allow any progress. 4, temperature conditions, numerical control lathe environment temperature taken in less than 30 degrees, relative humidity is less than 80%. In general, the numerical control electric cabinet with internal fan or cooling fan, to insist on electronic components, especially the CPU operation stable temperature or temperature change is very small. High temperature and humidity will results in the decrease of taking control system components, and leads to trouble. The increasing of temperature and humidity, dust will bond in a integrated circuit board, and cause a short-circuit.

Everyone who has a mill axis wants it to look multi axis cnc machine. However, in order to achieve that, it normally involves investing in a mill axis cnc service. Zhongshan JSTOMI CNC Machine Tool Co., Ltd. can offer you the best solution.

Are you interested in buying ? We also have all kinds of in offer. Visit JSTOMI CNC Machine to know more and order, we have them at pocket friendly prices.

multi axis cnc machine cnc service may be adapted for use at any mill axis and is suitable for multi axis cnc machine.