JSWAY cutting cnc machining center Chinese for plant

Overview of VMC550 machining center

VMC550 machining center feed axis for the X, Y, Z three coordinate control, the spindle for the servo motor power drive, the knife capacity of 16 optional. VMC550 machining center can achieve a variety of discs, boards, shells, cams, molds and other complex parts in a clamping, complete drilling, milling, boring, expansion, hinge, tapping and other processes processing, VMC550 machining center three-axis rail structure, applicable to all sectors of the complex parts of the single and mass production. VMC550 machining center processing to achieve the program, shorten the production cycle, so that users get a good economic benefits.

VMC550 machining center Features and Features

1, VMC550 machining center overall layout
    VMC550 machining center with vertical frame layout, the column fixed in the bed, the spindle box along the column up and down (Z direction), the slide along the bed longitudinal movement (Y direction), the table along the slide lateral movement (X) structure.

VMC550 machining center bed, table, slide, column, spindle box and other large pieces are used resin castings are cast, and after two aging treatment to eliminate stress, good stability, high strength, VMC550 machining center to ensure long-term machine. The use of the stability of the stability of the machine for the stability of the performance provided. VMC550 machining center are used Soldworks and Ansys optimized design, improve the rigidity and stability of the whole machine, effectively suppress the cutting force caused by deformation and vibration of the machine.

2, VMC550 machining center drag the system
 VMC550 machining center X, Y, Z axis linear guide are used in Taiwan are high quality wide linear guide, VMC550 machining center with automatic forced lubrication, reduce the friction of the feed movement, reduce low speed crawling, improve machine life accuracy.

VMC550 machining center X, Y, Z three-axis drive ball screw, using Taiwan's professional manufacturers HIWIN provide C3-level double nut preload ball screw, VMC550 machining center ball screw bearings at both ends of imported P4 grade 60º contact Angle screw special bearings, screw support with pre-tensioned structure, greatly reducing the long-term operation of the machine in the thermal deformation of the impact of precision.

VMC550 machining center Z-axis servo motor with automatic brake function, in the case of power failure, can automatically brake the motor shaft to hold, so that it can not turn, play the role of security protection.

3, VMC550 machining center spindle group
VMC550 machining center using Taiwan's well-known brands of high-speed, high precision, high rigidity spindle unit, VMC550 machining center of the important parts have been strengthened; VMC550 machining center using world-renowned brand P4-class spindle bearings and KLUBR NBU15 grease lubrication, After the spindle is assembled under constant temperature conditions, the computer has been calibrated and tested by the computer balance, which makes the whole spindle have long service life and high reliability.

VMC550 machining center spindle in its speed range can be achieved stepless speed regulation, the spindle motor built-in encoder control, spindle orientation and rigid tapping function.

VMC550 machining center spindle with a central inflatable structure, the spindle quickly after the knife with the center of the high pressure gas inside the cone to clean the cone to ensure the accuracy of tool clamping.

4, VMC550 machining center knife library
VMC550 machining center uses high-quality, high-quality, high-speed tool changers for high-speed tool changers. The tool change is accurate, time is short, high efficiency, and tested for millions of times.

5, VMC550 machining center cutting cooling system
VMC550 processing center is equipped with large flow cooling pump and large capacity water tank, fully guarantee the circulation cooling, cooling pump power: 450W, cooling pump flow 2.5m3 / h. VMC550 machining center The end of the spindle box is equipped with cooling nozzles, either water-cooled or air-cooled, and free to switch, VMC550 machining center cooling process can be controlled by M code or control panel. Configure a clean air gun to clean the machine.

6, VMC550 machining center pneumatic system
VMC550 Machining Center Pneumatic triplets are capable of filtering impurities and moisture from the air supply to prevent damage and corrosion of machine parts from impure gases. VMC550 machining center solenoid valve group through the PLC program control, to ensure that the spindle loose knife, spindle center blowing, spindle cutter, spindle air cooling and other actions can be completed quickly and accurately.

7. VMC550 machining center protection
VMC550 machining center with safety standards to meet the protection room, both to prevent the cooling fluid splash, but also to ensure safe operation, the appearance of pleasant. VMC550 machining center of the guide are shields to prevent chips, coolant into the machine inside, so that rails and ball screw from wear and corrosion.

8, VMC550 machining center lubrication system
VMC550 machining center rails, ball screw and support bearings are used to focus on automatic thin oil lubrication, each node with a quantitative oil separator, regular quantitative lubrication to the lubrication of parts to ensure uniform lubrication of the sliding surface, effectively reduced Rub the resistance, improve the movement accuracy, to ensure the ball screw and guide rail life.

9, VMC550 machining center chip removal system
 VMC550 machining center Y-axis split protection structure so that the process of iron produced directly on the bed, the bed inside the large slope structure makes the iron slips smoothly fall into the tank, VMC550 machining center after the chip structure to ensure that the workshop The internal clean, and then regularly filled with iron chips out of the chip box for manual cleaning, simple and practical and economical.