CNC turning lathe, Swiss type lathe original manufacturer since 2007.
CNC numerical control lathe factory introduction to use when need to choose the right tools
2020-08-06
JSWAY
61
CNC numerical control lathe factory is powerful, high precision, mute automatic lathe, automatic machine tools is controlled by the CAM process. Additionally there are CNC automatic lathes, pneumatic, automatic lathe, automatic lathe and the center displacement is the basic core after a certain amount of adjustment and the same product to be able to automatic processing for a long time.
< br / >
when using automatic CNC lathe, need to choose the right tools. In this way, can improve the cutting efficiency of the lathe. Use tools must first consider the machine processing capacity, process, parts and materials. In the installation and use of CNC lathe, should choose high hardness and wear resistance of the cutting tool. Only in this way can improve the manufacture of cutting tools, and the size of the cutting tool must be accurate. once the spindle speed range, 9 of the public ratio is smaller, the gear series, the more the more complex the structure of the machine tool. However, considering the performance of the application, the participation of more can reduce the relative loss of speed. Can according to the requirements of the automatic CNC lathe consumption rate and structural details. Three axis CNC lathe automatically guided by linear bearings, and by a digital servo motor drive. Linear layout tool is characterized by rapid change of tools. Numerical control system function is perfect, easy to control. According to the requirements of the parts processing, can choose horizontal composite drilling and milling power head. Equipped with automatic charger, can perform automatic production.< br / >
negative deviation in measurement of linear motion axis, measuring tool is usually a dial indicator or dial indicator. If the condition allows, you can use the dual-frequency laser interferometer measurement. Using dial or dial gauge measuring, should pay attention to the bottom of the dial and the length of the dial should not be too high or too long, because in the process of measurement, as a result of the cantilever is too long, base may force the motion measurement, lead to inaccurate count. Compensation value is not correct. If the measure to programmatically, the measurement process can be more convenient and accurate.< br / >
Owing to its mill axis and multi axis cnc machine benefits, has become a buzzword in the mill axis market.
So, get ready to dazzle the world with a wide range of multi axis cnc machine cnc service! Buy one today!! Visit Zhongshan JSTOMI CNC Machine Tool Co., Ltd. at JSTOMI CNC Machine.
Producing with varied technical skills, cnc service can be used in a wide range of applications as mill axis.
Advanced technology and manufacturing equipment has enhanced the core quality of cnc service.
If you are looking for best product, then here are some product like cnc service, multi axis cnc machine and mill axis in various styles which will surely meet your demand. Visit JSTOMI CNC Machine to know more!
GET IN TOUCH WITH Us
recommended articles
Daily “Clean + Lubricate” as the Baseline
After each shift, remove chips and coolant residue from the fixture surface and collet jaws with a soft cloth or air gun to prevent corrosion and re-clamping errors. Every eight hours, apply a trace of rust preventive oil to spring collets, guide bushings and other moving parts; once a week, add a thin coat of grease to ball-screw nuts and hydraulic cylinder rods to reduce wear. Before any prolonged shutdown, spray anti-rust oil on internal bores and locating faces and wrap them in wax paper or plastic film.
Precision Calibration & Data Closure
Use ring gauges or master bars every month to verify repeatability of the fixture; log results in the MES. If deviation exceeds 0.005 mm, trigger compensation or repair. For quick-change systems (HSK/Capto), check taper contact percentage every six months—target ≥ 80 %. If lower, re-grind or replace.
Spare Parts & Training
Keep minimum stock of jaws, seals and springs to enable replacement within two hours. Hold quarterly on-machine training sessions for operators on correct clamping practices and anomaly recognition to eliminate abusive clamping.
In short, embedding “clean–lubricate–inspect–calibrate” into daily SOP keeps the fixture delivering micron-level accuracy, reduces downtime, and extends overall machine life.
Six preventive measures
Environment control: keep the workshop at a stable temperature and low humidity; exclude dust and corrosive gases to reduce chemical wear on guideways and screws.
Daily checks: remove chips every shift and inspect the lubrication of the spindle, bearings, ball screws and guideways; act on any abnormality immediately.
Preventive lubrication: replace lubricants on schedule and keep the lubrication system unobstructed to minimize fatigue wear.
Accuracy monitoring: use laser interferometers or ball-bar systems monthly to measure geometric errors and compensate for ball-screw backlash or guideway straightness in time.
Electrical health checks: periodically examine cables, relays and cooling fans to prevent hidden aging caused by overheating.
Data monitoring: onboard sensors record spindle current, vibration and temperature; cloud-based analytics predict early bearing or tool failures.
Why prevention matters
• Ensures machining consistency: eliminating micron-level error sources keeps batch dimensions stable and reduces scrap.
• Extends machine life: preventing micro-cracks from growing can prolong overall life by more than 20 %.
• Reduces unplanned downtime: planned maintenance replaces emergency repairs, increasing overall equipment effectiveness (OEE) by 10 % or more.
• Cuts total cost: lower spare-parts inventory, labor and lost-production costs can save tens of thousands of dollars per machine annually.
• Enhances brand reputation: consistent on-time, defect-free deliveries strengthen customer trust and secure future orders.
Optimizing cycle time on turn-mill machining centers is crucial for boosting productivity and reducing costs. It requires a systematic approach addressing machine tools, cutting tools, processes, programming, fixtures, and material flow.
Ensure Geometric Accuracy
Swiss-type lathes process long, slender workpieces with multi-axis synchronization. A bed inclination of only 0.02 mm/m creates a “slope error” along the Z-axis, tilting the tool relative to the part centerline. This results in taper on outer diameters and asymmetric thread profiles. Periodic re-verification and re-leveling restore overall geometric accuracy to factory standards, guaranteeing consistent dimensions during extended production runs.
Extend Guideway and Ball-Screw Life
When the machine is not level, guideways carry uneven loads and lubricant films become discontinuous, accelerating localized wear and causing stick-slip or vibration. After re-leveling with shims or wedges, load distribution evens out, reducing guideway scoring and ball-screw side-loading. Service life typically improves by more than 20 %.
Suppress Thermal Growth and Vibration
A tilted bed leads to asymmetric coolant and lubricant flow, generating thermal gradients. Subsequent expansion further amplifies geometric errors. Re-verifying level, combined with thermal compensation, produces a more uniform temperature rise and reduces scrap caused by thermal drift. Additionally, a level bed raises natural frequencies, cutting chatter amplitude and improving surface finish by half to one full grade.
Chinese-built Swiss-type lathes have moved beyond the “low-cost substitute” label to become the “value leader” for overseas users. On the cost side, machines of comparable specification are priced well below those of traditional leading brands, and ongoing maintenance costs amount to only a fraction, dramatically lowering the entry barrier for small-to-medium job shops in Europe and North America. Lead time is equally compelling: major domestic OEMs can ship standard models within weeks, and special configurations follow shortly thereafter. When urgent orders arise from the electric-vehicle or medical-device sectors, Chinese production lines consistently deliver rapid responses.
Intelligence is on par with top-tier global standards. Machines routinely feature thermal compensation, AI-based tool-life prediction, and cloud-enabled remote diagnostics. Mean time between failures is long, and fully open data interfaces simplify secondary development for end users. Complementing this is a worldwide service network: Chinese manufacturers maintain parts depots and resident field engineers across the Americas, Europe, and Southeast Asia, enabling on-site support often within a single day, whereas legacy brands usually require factory returns measured in weeks.
1. Quick Troubleshooting Steps
Check the clamping pressure: Ensure the pressure plate or collet applies even force; too much or too little pressure will jam the bar. Adjust the pneumatic or hydraulic release mechanism accordingly.
Align the material path: Verify that the bar feeder, guide bushing, and spindle centers are collinear; any offset will cause the bar to twist or wedge.
Inspect belts and rollers: Belts must be tensioned correctly—loose belts slip, over-tight belts bind. Replace worn rollers immediately.
Lubricate moving parts: Clean and grease the eccentric shaft, release cam, and pusher fingers; lack of lubrication is a common cause of seizure.
I. Installation Guidelines for Swiss-Type Lathe Bed
1. Foundation Preparation
Floor Requirements: The Swiss lathe bed must be installed on a solid, level concrete foundation to prevent machining inaccuracies caused by ground settlement or vibration.
Load Capacity: The foundation must support the machine’s weight and dynamic cutting forces to avoid deformation affecting spindle and guide bushing alignment.
Vibration Isolation: If the workshop has vibration sources (e.g., punch presses, forging machines), anti-vibration pads or isolation trenches are recommended to enhance CNC machine stability.
Summary
Ball screws are the physical enablers of Swiss-type lathes across five critical dimensions:
Micron-level positioning for complex micro-structures;
High-speed rigidity supporting synchronized multi-axis cutting;
Active thermal control ensuring batch consistency;
Ultra-wear-resistant design enabling maintenance-free operation for 10+ years.
Their performance defines the precision ceiling of Swiss-type machining – truly "invisible champions" in precision transmission.
no data
Copyright © 2025 Guangdong JSWAY CNC machine tool co., ltd. | Sitemap | Privacy policy