precise cnc mill kit axis with tailstock for workshop

Company Advantages
1. The quality management of JSWAY is attached 100% importance. From the selection of the raw materials to the finished products, each step of inspection is strictly conducted and followed to meet the regulation of gifts and crafts. Its interface is designed to be simple and elegant
2. First-class quality and efficiency are guaranteed by Zhongshan JSTOMI CNC Machine Tool Co., Ltd. . The product is produced with a superior dynamic function
3. The product is hypoallergenic. During its production, any allergens caused by raw materials' ingredient, dye agents or chemical additives are eliminated. Its axis runs very fast, which can guarantee the highly efficient automatic machining
4. The product will not accumulate bacteria and dust. The small pores of the fibers have high filtration for the small particles or impurities. The product has a high-gloss surface, showing an outstanding look
5. The product features enough strength and toughness. It is usually made of welded metal which has the strong hardness and mechanical strength. Thanks to the craftsmanship, its size will not change once it is turned on again

Feature of cnc lathe machine with turret CFG46D

1、8~10 Station turret were used in this model.

2、Z axis with lead screw of Φ40mm, powerful and high speed.

3、Whole protection inside the machine with bigger space, waterproof and bits proof

4、High machining speed up to 4500R/M, extremely smooth finish

5、High accuracy machining, stay almost the same accuracy both cold or heat machine

6、Travel speed up to 36 m/min.

Technical parameter of cnc lathe machine tool cfg46d

   (1)the A2-5 spindle is from Taiwan

   (2) use the P4 level NSK bearing from Japan

   (3) the high speed up to 4500 rpm.

   (4) the max. through bar material diameter is 35mm.

   (5) can instal 5 inches maual chuck

   (6) can instal 5 inches hydraumatic 3-jaw lathe chuck

(1)the spindle motor is from SHANGHAI SFC.

(2) can use 5kw frequency motor or 5.5kw servo motor 

(3) the high speed up to 4500 rpm.

(4) the servo motor can get the bigger torque when low turning

X/Z axis servo motor and servo pack

(1)gang type cnc lathe machine body.
(2)X-axis and Z-axis assembly

linear Guide and BallScrew

NSK bearing








     (1) gang type cnc lathe machine body.

     (2) X-axis and Z-axis assembly.

     (3) slanting bed for gang type.

     (4) HIWIN lead screw and couple

     (5) NSK bearing.







 

machining example







 



    (1) full cover for gang type cnc lathe machine CFG46D model.

    (2) stainless steel for cover.

    (3) turret can instal 8 tools.gang tool can install 3 tools

    (4) free provide 2 long and 2 short tool holders

   



   (1) 1300W YASKAWA servo motor for X-axis

    (2) 1300W YASKAWA servo motor for Z-axis

    (3) 36 m/min for travel speed

 














  1) hydraulic cylinders from TAIWAN.

 




     (1) hydraulic system motor and cooling motor

      (2) hydraulic system motor for 1 hp.

    

     



     

     (1) electrical cabinets for gang type cnc lathe machine

      (2) Magmeet frequency driver from SHENZHEN for spindle motor

      (3) servo motor driver from YASKAWA for X-axis and Y-axis motor

      (4) Schneider switch

     






       (1) controller panel

      (2) controller can be change for SYNTEC,GSK,LNC and so on

      (3) controller can be set in English

      (4) we have JSTOMI and JSWAY two logos.

(1) all cnc lathe machine tool with HTS CE certificate

(2) all cnc lathe machine tool with ECM CE certificate

Packing : in wooden case like follow

Packing size(mm)

                   

Company Features
1. Zhongshan JSTOMI CNC Machine Tool Co., Ltd. is professionally supplying high quality cnc mill kit since its establishment.
2. vertical cnc is produced by good source of material.
3. We rigorously control the quality of to meet the high requirements of customers.