Guangdong JSWAY CNC Machine Tool Co., Ltd. since 2004.
JSWAY design used cnc machining center on sale for factory
-
v s
1. To Zhongshan JSTOMI CNC Machine Tool Co., Ltd. , adopting superior raw material for used cnc machining center is responsible for customers.
2. The product is radiation resistant. Its plastics and polymers materials with enhanced shape retention properties can effectively stand up the radiation.
3. The product is characterized by low heat generation. During its operation, exothermic reactions between the chemicals used and Joule heating will not increase its temperature.
4. Zhongshan JSTOMI CNC Machine Tool Co., Ltd. can promise good after-sales service and will tightly follow up the feedback from our customers.
5. Our ongoing commitment to research and development has enabled us to successfully and independently introduce a wide variety of used cnc machining center .
Feature of cnc lathe machine with turret CFG46D
1、8~10 Station turret were used in this model.
2、Z axis with lead screw of Φ40mm, powerful and high speed.
3、Whole protection inside the machine with bigger space, waterproof and bits proof
4、High machining speed up to 4500R/M, extremely smooth finish
5、High accuracy machining, stay almost the same accuracy both cold or heat machine
6、Travel speed up to 36 m/min.
Technical parameter of cnc lathe machine tool cfg46d
| NC | TAIWAN/CHINA | LNC/SYNTEC/GSK |
| Spindle | Taiwan POSA | A2-4/46 |
| Turret | Lio shing | 8/10 station |
| Servo motor | YASKAWA | 1300W |
| Spindle motor/spindle servo motor | Shanghai Senlima/SFC | 4.0KW/5.5KW |
| Frequency converter / Frequency driver | V/T | 5.5KW/7.5KW |
| Lead screw | HIWIN/PMI | C3,PⅡlevel |
| Bearing | NSK,FAG | P4 level |
| Lead screw coupler | Made in germen | high precision level |
| PARAMETER | ||
| CFG46D | ||
| Capacity | Spindle bore | 56mm |
| Max. material diameter: | 45mm | |
| Max machining diameter | 350mm | |
| Max. length of machining | 150mm | |
| Max. travel of X-axis | 720mm | |
| Max. travel of Z-axis | 280mm | |
| X-axis/Z fast moving | 36m/min | |
| Reposition accuracy | 0.005mm | |
| Motor | Frequency converter/Servo motor | 4.0kw/5.5kw |
| Spindle speed | 5000r/min | |
| X-axis servo motor | 1300w | |
| Z-axis servo motor | 1300w | |
| Tools | Gang type tools | 8+3 |
| Live tool | NO | |
| Others | Total installed capacity | 6KW |
| Size | 2025*1385*1910 | |
| N.W. | 2750KG |
(1)the A2-5 spindle is from Taiwan
(2) use the P4 level NSK bearing from Japan
(3) the high speed up to 4500 rpm.
(4) the max. through bar material diameter is 35mm.
(5) can instal 5 inches maual chuck
(6) can instal 5 inches hydraumatic 3-jaw lathe chuck
(1)the spindle motor is from SHANGHAI SFC.
(2) can use 5kw frequency motor or 5.5kw servo motor
(3) the high speed up to 4500 rpm.
(4) the servo motor can get the bigger torque when low turning
X/Z axis servo motor and servo pack
(1)gang type cnc lathe machine body.
(2)X-axis and Z-axis assembly
linear Guide and BallScrew
NSK bearing (1) gang type cnc lathe machine body.
(2) X-axis and Z-axis assembly.
(3) slanting bed for gang type.
(4) HIWIN lead screw and couple
(5) NSK bearing.
machining example
(1) full cover for gang type cnc lathe machine CFG46D model.
(2) stainless steel for cover.
(3) turret can instal 8 tools.gang tool can install 3 tools
(4) free provide 2 long and 2 short tool holders
(1) 1300W YASKAWA servo motor for X-axis
(2) 1300W YASKAWA servo motor for Z-axis
(3) 36 m/min for travel speed
1) hydraulic cylinders from TAIWAN.
(1) hydraulic system motor and cooling motor
(2) hydraulic system motor for 1 hp.
(1) electrical cabinets for gang type cnc lathe machine
(2) Magmeet frequency driver from SHENZHEN for spindle motor
(3) servo motor driver from YASKAWA for X-axis and Y-axis motor
(4) Schneider switch
(1) controller panel
(2) controller can be change for SYNTEC,GSK,LNC and so on
(3) controller can be set in English
(4) we have JSTOMI and JSWAY two logos.
(1) all cnc lathe machine tool with HTS CE certificate
(2) all cnc lathe machine tool with ECM CE certificate
Packing : in wooden case like follow
Packing size(mm)
| 2300 | 1740 | 2150 |
Company Features
1. Zhongshan JSTOMI CNC Machine Tool Co., Ltd. has been in the used cnc machining center sector for several years.
2. With abundant technical strength, JSWAY is really competitive in cnc mill industry.
3. We want to operate in a safe, efficient and ethical way, protecting the planet and supporting the communities we work in while widening the value we offer to our customers. We pursue environmental protection in our business. We maintain a high level of environmental awareness and have found production ways to improve environmental friendliness.