Guangdong JSWAY CNC Machine Tool Co., Ltd. since 2004.
JSWAY Brand Customize gang Spindle cnc lathe
1. The adopt of cnc lathe machine bring the cnc lathe axis features of cnc lathe machine. The product has been exported to many oversea countries, like UK
2. The product has a high-gloss surface, showing an outstanding look. Our cnc lathe,cnc lathe axis has many usages and is widely used in cnc lathe machine.
3. The cutting performed by the product is very smooth. our lines of processing refers to the cnc lathe axis and cnc lathe machine.
4. It can produce small and flexible parts in an efficient way. JSWAY's entire product range is manufactured using quality assured raw components and advanced technologies thereby giving exceptional range of products to our discerning clients.
Features of 5-axis y-axis cnc lathe machine tool CFG46Y2:
1. Y axis have engraving function.
2. This model is for turning, side milling and drilling.
3. Big space for machining, Z/X axis travel is long.
4. Y axis have 2 living tools; X axis can install 5-7 gang tools.
5. Japan gear, low sounds, high precision for Y axis living tool.
6. Spindle with C-axis indexing function.
Technical parameter for 5-axis y-axis cnc lathe machine tool CFG46Y2
| NC | TAIWAN/GUANGZHOU | LNC/SYNTEC/GSK |
| Spindle | TaiWan Posa | A2-5/46 spindle |
| X.Z axis servo motor | Japan YASKAWA | 1300 W |
| Y axis servo motor | Japan YASKAWA | 750W |
| Spindle servo motor | Japan YASKAWA | 4.4 KW |
| Spindle servo pack | Japan YASKAWA | 5.5 KW |
| Lead screw/lead rail | TaiWan HIWIN/PMI | C3 , level two |
| Bearing | Japan NSK,Germany FAG | P4 level |
| Coupler for lead Screw | From Germany | high Precision |
| Parameter | ||
| Capacity | Spindle bore | ¢56 mm |
| Max. material diameter | ¢45 mm | |
| Max. machining diameter | ¢350 mm | |
| Max. length of machining | 180 mm | |
| Max. travel of x-axis | 720 mm | |
| Max. travel of z-axis | 280 mm | |
| Max. travel of Y-axis | 100 mm | |
| Rapid speed (x-axis/z-axis) | 36 m/min | |
| Reposition accuracy | 0.005 mm | |
| Motor | Spindle servo motor | 4.4 KW |
| Spindle speed | 3000 rpm | |
| X/Z-axis servo motor | 1300 W | |
| Y-axis servo motor | 750 W | |
| Servo motor for power unit | 750 W | |
| Tools | Gang type tools | 3--5 |
| Total living power tool unit | 2 | |
| Living tool holder size | ER20/25 | |
| Other | Total power | 7KW |
| Size( L x W x H ) | 2070*1580*1870 | |
| N.W. | 2550 KGS |
(1)the A2-4 spindle is from Taiwan
(2) use the P4 level NSK bearing from Japan
(3) the high speed up to 6000 rpm.
(4) the max. through bar material diameter is 35mm.
(5) can instal 5 inches maual chuck
(6) can instal 5 inches hydraumatic 3-jaw lathe chuck
(1)the spindle motor is from Yaskawa
(2) 4.4KW spindle motor
(3) the high speed up to 4500 rpm.
(4) the servo motor can get the bigger torque when low turning
X/Z axis servo motor and servo pack
(1) gang type cnc lathe machine body.
(2)X-axis and Z-axis assembly
Linear Guide and BallScrew
NSK bearing
P4 level
(1) gang type cnc lathe machine body.
(2) X-axis and Z-axis assembly.
(3) slanting bed for gang type.
(4) HIWIN lead screw and couple
(5) NSK bearing.
(1) full cover for gang type cnc lathe machine CFG46Y2 model.
(2) stainless steel for cover.
(3) gang type can instal 6 to 7 tools.
(4) free provide 2 long and 2 short tool holders
(5) Y axis living tool size is ER25, tools diameter is 1~16mm
(1) 13000W YASKAWA servo motor for X-axis
(2) 1300W YASKAWA servo motor for Z-axis
(3)850W YASKAWA servo motor for Y-axis
(4) 1300W YASKAWA servo motor for living tool
(5) 36 m/min for travel speed
1) hydraulic cylinders from TAIWAN.
(1) hydraulic cooler
(2) hydraulic pump motor use 2 hp
(1) electrical cabinets for4 axis type cnc lathe machine
(2)YASKAWA servo pack for spindle motor
(3) servo motor driver from YASKAWA for X-axis and Y-axis motor
(4) Schneider switch
(1) controller panel
(2) controller can be change for SYNTEC,GSK and so on
(3) controller can be set in English
(4) we have JSTOMI and JSWAY two logos.
pressure gate
(1) all cnc lathe machine tool with HTS CE certificate
(2) all cnc lathe machine tool with ECM CE certificate
PACKING AS BELOW
Company Features
1. What distinguishes us from other companies is that JSWAY is a specialist in designing and manufacturing cnc lathe.
2. Only through independent technological innovation, JSWAY can be more competitive in the cnc lathe industry.
3. Zhongshan JSTOMI CNC Machine Tool Co., Ltd. is a famous firm which strives to become among the most competitive exporter in cnc lathe marketplace. Inquire!