JSWAY WU800 6 Axes Interpolate Y-Axis Dual Electric Spindle Dual Upper Power Turret Machine193

Company Advantages
1. JSWAY is independently designed by our designers who think highly of the innovation. It is highly recommended for its wear-resistant performance
2. Thanks to its high efficiency, the product only consume a little power energy. People said the operating cost of this product is lower than they expect. The product makes no noise during the operation
3. The product has stable physical properties in the specific conditions of temperature and pressure. Its physical properties are decided by its crystal structure. It can be offered at a favorable price
4. The product operates satisfactorily in its electromagnetic environment without affecting other devices. Its properly-designed enclosure greatly helps reduce electromagnetic interference.
5. The stable and reliable chemical and physical properties of this product are the outcomes of its internal structure which is uniquely formed. Under the extreme weather, the machine can operate normally

Features of 5-axis y-axis cnc lathe machine tool CFG46Y2:

1. Y axis have engraving function.

2. This model is for turning, side milling and drilling.

3. Big space for machining, Z/X axis travel is long.

4. Y axis have 2 living tools; X axis can install 5-7 gang tools.

5. Japan gear, low sounds, high precision for Y axis living tool.

6. Spindle with C-axis indexing function.

Technical parameter for 5-axis y-axis cnc lathe machine tool CFG46Y2

   

  (1)the A2-4 spindle is from Taiwan

   (2) use the P4 level NSK bearing from Japan

   (3) the high speed up to 6000 rpm.

   (4) the max. through bar material diameter is 35mm.

   (5) can instal 5 inches maual chuck

   (6) can instal 5 inches hydraumatic 3-jaw lathe chuck



 

(1)the spindle motor is from Yaskawa

(2) 4.4KW spindle motor

(3) the high speed up to 4500 rpm.

(4) the servo motor can get the bigger torque when low turning

X/Z axis servo motor and servo pack

   (1) gang type cnc lathe machine body.
   (2)X-axis and Z-axis assembly

Linear Guide and BallScrew

   NSK bearing
   P4 level







   

     (1) gang type cnc lathe machine body.

     (2) X-axis and Z-axis assembly.

     (3) slanting bed for gang type.

     (4) HIWIN lead screw and couple

     (5) NSK bearing.

   

    (1) full cover for gang type cnc lathe machine CFG46Y2 model.

     (2) stainless steel for cover.

     (3) gang type can instal 6 to 7 tools.

     (4) free provide 2 long and 2 short tool holders
     (5) Y axis living tool size is ER25, tools diameter is 1~16mm

   



   (1) 13000W YASKAWA servo motor for X-axis

    (2) 1300W YASKAWA servo motor for Z-axis
    (3)850W YASKAWA servo motor for Y-axis
    (4) 1300W YASKAWA servo motor for living tool

    (5) 36 m/min for travel speed

 













  1) hydraulic cylinders from TAIWAN.

   (1) hydraulic cooler
   (2) hydraulic pump motor use 2 hp 

      (1) electrical cabinets for4 axis type cnc lathe machine

      (2)YASKAWA servo pack for spindle motor

      (3) servo motor driver from YASKAWA for X-axis and Y-axis motor

       (4) Schneider switch

 

 





     (1) controller panel

      (2) controller can be change for SYNTEC,GSK and so on

      (3) controller can be set in English

      (4) we have JSTOMI and JSWAY two logos.

pressure gate

       








      (1) all cnc lathe machine tool with HTS CE certificate

       (2) all cnc lathe machine tool with ECM CE certificate











PACKING AS BELOW

                   

Company Features
1. Zhongshan JSTOMI CNC Machine Tool Co., Ltd. adopts the most advanced technology in producing .
2. Zhongshan JSTOMI CNC Machine Tool Co., Ltd. will be in endless pursuit of better . Inquiry!