Guangdong JSWAY CNC Machine Tool Co., Ltd. since 2004.
JSWAY cnc lathing machine vendor for flashlight part
1. The whole production of JSWAY china cnc turning center is finished by our professional craftsmen
2. Through the strict test upon lathing machine , the quality of it can be guaranteed. Its parts are installed firmly, which will prevent the deflection or vibration from happening
3. The product can work with high accuracy. Its distinguished self-diagnostic feature can make sure that every motion is of high accuracy. Swiss lathe machines are capable of simultaneous machining operations. While the workpiece is supported by the guide bushing, multiple tools, including turning, milling, drilling, and tapping tools, can perform operations simultaneously. This significantly reduces cycle times and increases productivity
4. The product can bear the most demanding industrial conditions. It is made of heavy-duty materials such as steel alloys and is not prone to rust and corrosion. Its cutting speed will not change even under the heavy cutting
5. The product is not likely to accumulate too much heat. Its powerful cooling system is designed to maintain the proper temperature of mechanical parts, allowing it to have good heat dissipation. VMCs are available in both three-axis and multi-axis configurations, providing flexibility to accommodate various machining requirements. Multi-axis VMCs enable simultaneous machining from multiple angles, allowing for the production of intricate and complex parts in a single setup
Dual Spindle Cnc Lathe Supplier Sauter Turret Twin Spindle CNC Turning Machine BMT55
Dual spindle CNC lathe, also known as a twin-spindle lathe, is a type of computer numerical control (CNC) machine tool that is designed to have two spindles. The twin spindle cnc turning machines are commonly used in the manufacturing industry for high-volume production of symmetrical parts. The most notable feature of a dual spindle lathe is the presence of two spindles, typically positioned on opposite sides of the machine bed. Each spindle can independently hold and rotate a workpiece, allowing for simultaneous machining operations on both ends of the part.
| With two spindles, a double spindle lathe enables the machining of both the front and back of a workpiece simultaneously. This significantly reduces cycle times, increasing productivity and throughput. It eliminates the need for manual repositioning or flipping of the part, saving time and improving overall efficiency. | Dual spindle lathes allow for performing complex operations such as turning, drilling, milling, tapping, grooving, and threading simultaneously on both ends of the workpiece. This capability eliminates the need for multiple setups or additional secondary operations, streamlining the manufacturing process. |
Technical parameter for JS300/JS500
| JS500 | JS300 | ||
| NC | TAIWAN/GUANGZHOU | SYNTEC | SYNTEC |
| Electric Main Spindle | Design by JSWAY | A2-6 | A2-5 |
| Electric Sub Spindle | Design by JSWAY | A2-5 | A2-4 |
| servo turret | Sauter | 12T | 12T |
| X.Y.Z axis servo motor | Japan YASKAWA | 1800 W | 1800w |
| Main spindle cylinder | chandox/autogrip | 8 inches | 6 inches |
| Sub spindle cylinder | chandox/autogrip | 6 inches | 5 inches |
| Main Spindle power | JSWAY | 15KW | 11KW |
| Sub Spindle power | JSWAY | 11KW | 7.5KW |
| Lead screw/lead rail | TaiWan HIWIN/PMI | C3 , level two | C3 , level two |
| Bearing | Japan NSK,Germany FAG | P4 level | P4 level |
| Parameter | |||
| Capacity | Max. material diameter thru main spindle | ¢55 mm | ¢45mm |
| Max. material diameter thru main spindle | ¢45 mm | ¢35mm | |
| Swing over bed | ¢500mm | ¢500mm | |
| Max. machining diameter | ¢300 mm | ¢450 mm | |
| Max. length of machining | 500 mm | 300 mm | |
| Max. travel of x-axis | 260 mm | 450mm | |
| Max. travel of z-axis | 500 mm | 300 mm | |
| Max. travel of Y-axis | 100 mm | 100 mm | |
| Rapid speed (x-axis/z-axis) | 30 m/min | 30 m/min | |
| Reposition accuracy | 0.005 mm | 0.005 mm | |
| Motor | Main electric spindle | 15KW | 11KW |
| Spindle speed | 3000 rpm | 3000 rpm | |
| X/Y/Z-axis servo motor | 1800 W | 1800 W | |
| Tools | Servo turret | 12T | 12T |
| Living tool holder size | ER32 | ER32 | |
| Other | Total power | 25KW | 25KW |
| Size( L x W x H ) | 2748*2616*2325 | 2470*2192*2070 | |
| N.W. | 4500 KGS | 3500KGS | |
Professional dual spindle CNC lathe;
Twin spindle CNC lathe machine with Y axis&12T turret
CNC double spindle machines are widely used in industries such as automotive, aerospace, medical, and general manufacturing. Their ability to simultaneously machine multiple workpieces or different sides of a workpiece makes them highly efficient for high-volume production, reducing cycle times and increasing overall productivity.
High performance twin/double spindle CNC lathe manufacturer, contact JSWAY for CNC lathe price.
(1) all CNC lathe machine tool with HTS CE certificate
(2) all CNC lathe machine tool with ECM CE certificate
PACKING AS BELOW
Company Features
1. Guangdong JSWAY CNC Machine Tool Co., Ltd. is a world's leading provider of patent lathing machine whose business is the R&D and sale of china cnc turning center .
2. Our company has been licensed with an export license. The license is issued by the Foreign Trade Department. With this license, we can avail of benefits such as tax policy from the Department for the export scheme, hence we can provide more price-competitive products to clients.
3. Sustainability is the key to our operation. We work hard to create systems that minimize our impact on the environment by limiting waste and using resources efficiently.