Guangdong JSWAY CNC Machine Tool Co., Ltd. since 2004.
4 axis CNC milling lathe machine with Sauter servo turret SY500/S500/SY300/S300 machining center22
1. The surface process of JSWAY includes rust, grease, oxidization, and burnishing. All these processes are done in line with hardware manufacture standards both domestically and internationally.
2. is said to be the most popular due to its .
3. is of characteristics of .
4. The service provided by JSWAY has shown its care and consideration to customers.
5. Humanized exterior package for will be offered by us.
Features of 5-axis y-axis cnc lathe machine tool CFG46Y2:
1. Y axis have engraving function.
2. This model is for turning, side milling and drilling.
3. Big space for machining, Z/X axis travel is long.
4. Y axis have 2 living tools; X axis can install 5-7 gang tools.
5. Japan gear, low sounds, high precision for Y axis living tool.
6. Spindle with C-axis indexing function.
Technical parameter for 5-axis y-axis cnc lathe machine tool CFG46Y2
| NC | TAIWAN/GUANGZHOU | LNC/SYNTEC/GSK |
| Spindle | TaiWan Posa | A2-5/46 spindle |
| X.Z axis servo motor | Japan YASKAWA | 1300 W |
| Y axis servo motor | Japan YASKAWA | 750W |
| Spindle servo motor | Japan YASKAWA | 4.4 KW |
| Spindle servo pack | Japan YASKAWA | 5.5 KW |
| Lead screw/lead rail | TaiWan HIWIN/PMI | C3 , level two |
| Bearing | Japan NSK,Germany FAG | P4 level |
| Coupler for lead Screw | From Germany | high Precision |
| Parameter | ||
| Capacity | Spindle bore | ¢56 mm |
| Max. material diameter | ¢45 mm | |
| Max. machining diameter | ¢350 mm | |
| Max. length of machining | 180 mm | |
| Max. travel of x-axis | 720 mm | |
| Max. travel of z-axis | 280 mm | |
| Max. travel of Y-axis | 100 mm | |
| Rapid speed (x-axis/z-axis) | 36 m/min | |
| Reposition accuracy | 0.005 mm | |
| Motor | Spindle servo motor | 4.4 KW |
| Spindle speed | 3000 rpm | |
| X/Z-axis servo motor | 1300 W | |
| Y-axis servo motor | 750 W | |
| Servo motor for power unit | 750 W | |
| Tools | Gang type tools | 3--5 |
| Total living power tool unit | 2 | |
| Living tool holder size | ER20/25 | |
| Other | Total power | 7KW |
| Size( L x W x H ) | 2070*1580*1870 | |
| N.W. | 2550 KGS |
(1)the A2-4 spindle is from Taiwan
(2) use the P4 level NSK bearing from Japan
(3) the high speed up to 6000 rpm.
(4) the max. through bar material diameter is 35mm.
(5) can instal 5 inches maual chuck
(6) can instal 5 inches hydraumatic 3-jaw lathe chuck
(1)the spindle motor is from Yaskawa
(2) 4.4KW spindle motor
(3) the high speed up to 4500 rpm.
(4) the servo motor can get the bigger torque when low turning
X/Z axis servo motor and servo pack
(1) gang type cnc lathe machine body.
(2)X-axis and Z-axis assembly
Linear Guide and BallScrew
NSK bearing
P4 level
(1) gang type cnc lathe machine body.
(2) X-axis and Z-axis assembly.
(3) slanting bed for gang type.
(4) HIWIN lead screw and couple
(5) NSK bearing.
(1) full cover for gang type cnc lathe machine CFG46Y2 model.
(2) stainless steel for cover.
(3) gang type can instal 6 to 7 tools.
(4) free provide 2 long and 2 short tool holders
(5) Y axis living tool size is ER25, tools diameter is 1~16mm
(1) 13000W YASKAWA servo motor for X-axis
(2) 1300W YASKAWA servo motor for Z-axis
(3)850W YASKAWA servo motor for Y-axis
(4) 1300W YASKAWA servo motor for living tool
(5) 36 m/min for travel speed
1) hydraulic cylinders from TAIWAN.
(1) hydraulic cooler
(2) hydraulic pump motor use 2 hp
(1) electrical cabinets for4 axis type cnc lathe machine
(2)YASKAWA servo pack for spindle motor
(3) servo motor driver from YASKAWA for X-axis and Y-axis motor
(4) Schneider switch
(1) controller panel
(2) controller can be change for SYNTEC,GSK and so on
(3) controller can be set in English
(4) we have JSTOMI and JSWAY two logos.
pressure gate
(1) all cnc lathe machine tool with HTS CE certificate
(2) all cnc lathe machine tool with ECM CE certificate
PACKING AS BELOW
Company Features
1. Zhongshan JSTOMI CNC Machine Tool Co., Ltd. has achieved long-term and stable development for its .
2. Strong technical capabilities make Zhongshan JSTOMI CNC Machine Tool Co., Ltd. stand at the forefront of the industry.
3. Our major goal is to provide high quality with our customers. Inquire! The service idea of in Zhongshan JSTOMI CNC Machine Tool Co., Ltd. emphasize on . Inquire! Different from traditional products, our is more cutting edge and bring you greater convenience. Inquire!
Pre-Sales Service After-Sales Service
• Inquiry and consulting support. • Training how to install the machine ,
• Sample testing support. training how to use the machine . • View our factory. • Engineers available to service machinery
overseas.
JIEHE strives for excellent quality and efficiency, focus on standardized procedures and customer experience improvement. This results in an extensive service offering that includes:
• Quick response
• Accurate and efficient order processing
• Quality inspection support
• On-time and error-free delivery
• Video technical support
• Prompt parts & free toolkit supply
We aim to satisfy our customer’s request, based on a solid understanding and position for our customers’ needs.
Multi Attachments Mini Skid Steer loader
JIEHE mini skid steer loader allows you to pair it with many attachments you may already own and use, while one loader can for various function. JIEHE mini-skid steer loader can attach different attachments, such as bucket, excavator, auger, trencher, hydraulic breaker, pallet forks, tiller, 4 in 1 bucket, wood chipper, root grapple and so on, to ensure that the work you might do has an attachment to complete.
1)Multi-function and wide applications
2)Simple and clear operation system
3)Easy to repair, the observation and the operation windows are opened on both sides of vertical plate.
4)Track replacement fast
JHZA-25 | |||
Item | Main description | Metric | Inch |
A | Length | 2588mm | 102" |
B | Height | 1096mm | 43" |
C | Maximum hinged height | 1905mm | 75" |
D | Length without bucket | 1835mm | 72" |
E | Distance between wheels | 920mm | 36" |
F | Radius of rear suspension turn | 726mm | 28" |
G | Distance to the ground | 170mm | 7" |
H | Unloading height | 1015mm | 40" |
I | Maximum high unloading angle | 37° | 37° |
J | Bucket angle in the air | 26° | 26° |
| Weight without the attachment | 1038kg | 2288lb |
Hydraulic system
Flow of hydraulic system | 54.8L/MIN |
Max pressure of the walking mechanism | 21MPA |
Rated pressure of the working device | 17.5MPA |
Flow of auxiliary systems | 49L/MIN |
Hydraulic tank volume | 53L |
Connector mode | Flat sealed quick connector |
Engine
Emission Standards | EU Stage III / US EPA4 |
Manufacturer | Kubota-D1105-E4B |
Fuel / Cooling | Diesel/Water cooling |
Cylinders | 3 |
Power | 1805kw/25.2hp&3000rpm/min |
Displacement | 1.123L |
Oil tank volume | 43L |
Air filter | Heavy duty two-stage safety air filter |
With Auger:
Auger Diameter: ∅200-∅600mm (∅8-∅24")
Auger Depth: 1-1000mm(1-39")
Auger Weight: 134-181kg(295-399lbs)
With Tiller:
Working Width: 1000mm (39")
Working Depth: 60-150mm(2.4-6")
Blade Numbers: 28Pieces
Weight: 209kg(461lbs)
Size(L*W*H):1200*680*520(MM)(47*27*20")