JSWAY best table cnc machine vendor for plant

Company Advantages
1. JSWAY 2 axis lathe machine obeys the international production standard and green specification. The product can perform quick positioning
2. According to market data analysis, the product has unlimited potential. Thanks to the craftsmanship, its size will not change once it is turned on again
3. table cnc machine It is manufactured by advanced manufacturing technology and fine processing technology, with smooth and bright surface, good waterproof performance, strong corrosion resistance, and longer service life than other similar products.
4. table cnc machine The main body is made of high-quality fabric, which has the advantages of waterproof, wear-resistant and foldable, while the lining is made of smooth and dirt-resistant fabric.
5. The transducer of table cnc machine is made of stainless steel, which has the advantages of acid resistance, alkali resistance and durability, which makes cnc lathes less prone to performance failure and more durable.

Feature of cnc lathe machine with turret CFG46D

1、8~10 Station turret were used in this model.

2、Z axis with lead screw of Φ40mm, powerful and high speed.

3、Whole protection inside the machine with bigger space, waterproof and bits proof

4、High machining speed up to 4500R/M, extremely smooth finish

5、High accuracy machining, stay almost the same accuracy both cold or heat machine

6、Travel speed up to 36 m/min.

Technical parameter of cnc lathe machine tool cfg46d

   (1)the A2-5 spindle is from Taiwan

   (2) use the P4 level NSK bearing from Japan

   (3) the high speed up to 4500 rpm.

   (4) the max. through bar material diameter is 35mm.

   (5) can instal 5 inches maual chuck

   (6) can instal 5 inches hydraumatic 3-jaw lathe chuck

(1)the spindle motor is from SHANGHAI SFC.

(2) can use 5kw frequency motor or 5.5kw servo motor 

(3) the high speed up to 4500 rpm.

(4) the servo motor can get the bigger torque when low turning

X/Z axis servo motor and servo pack

(1)gang type cnc lathe machine body.
(2)X-axis and Z-axis assembly

linear Guide and BallScrew

NSK bearing








     (1) gang type cnc lathe machine body.

     (2) X-axis and Z-axis assembly.

     (3) slanting bed for gang type.

     (4) HIWIN lead screw and couple

     (5) NSK bearing.







 

machining example







 



    (1) full cover for gang type cnc lathe machine CFG46D model.

    (2) stainless steel for cover.

    (3) turret can instal 8 tools.gang tool can install 3 tools

    (4) free provide 2 long and 2 short tool holders

   



   (1) 1300W YASKAWA servo motor for X-axis

    (2) 1300W YASKAWA servo motor for Z-axis

    (3) 36 m/min for travel speed

 














  1) hydraulic cylinders from TAIWAN.

 




     (1) hydraulic system motor and cooling motor

      (2) hydraulic system motor for 1 hp.

    

     



     

     (1) electrical cabinets for gang type cnc lathe machine

      (2) Magmeet frequency driver from SHENZHEN for spindle motor

      (3) servo motor driver from YASKAWA for X-axis and Y-axis motor

      (4) Schneider switch

     






       (1) controller panel

      (2) controller can be change for SYNTEC,GSK,LNC and so on

      (3) controller can be set in English

      (4) we have JSTOMI and JSWAY two logos.

(1) all cnc lathe machine tool with HTS CE certificate

(2) all cnc lathe machine tool with ECM CE certificate

Packing : in wooden case like follow

Packing size(mm)

                   

Company Features
1. The focus on innovation enables JSWAY to be the leader in the table cnc machine industry absolutely. With ever increasing needs for high quality, Zhongshan JSTOMI CNC Machine Tool Co., Ltd. has adopted advanced technology to guarantee.
2. This cnc lathes not only promotes its capacity, but also saving 2 axis lathe machine .
3. mini lathe for sale is very easy to be installed for its 2 axis cnc lathe machine . With the accelerating process of society,JSWAY will follow the trend and work hard to supply better price for cnc lathe machine . Ask online!