JSWAY machine cnc machine vendors supplier for workplace

Feature of cnc lathe machine with turret CFG46D

1、8~10 Station turret were used in this model.

2、Z axis with lead screw of Φ40mm, powerful and high speed.

3、Whole protection inside the machine with bigger space, waterproof and bits proof

4、High machining speed up to 4500R/M, extremely smooth finish

5、High accuracy machining, stay almost the same accuracy both cold or heat machine

6、Travel speed up to 36 m/min.

Technical parameter of cnc lathe machine tool cfg46d

   (1)the A2-5 spindle is from Taiwan

   (2) use the P4 level NSK bearing from Japan

   (3) the high speed up to 4500 rpm.

   (4) the max. through bar material diameter is 35mm.

   (5) can instal 5 inches maual chuck

   (6) can instal 5 inches hydraumatic 3-jaw lathe chuck

(1)the spindle motor is from SHANGHAI SFC.

(2) can use 5kw frequency motor or 5.5kw servo motor 

(3) the high speed up to 4500 rpm.

(4) the servo motor can get the bigger torque when low turning

X/Z axis servo motor and servo pack

(1)gang type cnc lathe machine body.
(2)X-axis and Z-axis assembly

linear Guide and BallScrew

NSK bearing








     (1) gang type cnc lathe machine body.

     (2) X-axis and Z-axis assembly.

     (3) slanting bed for gang type.

     (4) HIWIN lead screw and couple

     (5) NSK bearing.







 

machining example







 



    (1) full cover for gang type cnc lathe machine CFG46D model.

    (2) stainless steel for cover.

    (3) turret can instal 8 tools.gang tool can install 3 tools

    (4) free provide 2 long and 2 short tool holders

   



   (1) 1300W YASKAWA servo motor for X-axis

    (2) 1300W YASKAWA servo motor for Z-axis

    (3) 36 m/min for travel speed

 














  1) hydraulic cylinders from TAIWAN.

 




     (1) hydraulic system motor and cooling motor

      (2) hydraulic system motor for 1 hp.

     



     

     (1) electrical cabinets for gang type cnc lathe machine

      (2) Magmeet frequency driver from SHENZHEN for spindle motor

      (3) servo motor driver from YASKAWA for X-axis and Y-axis motor

      (4) Schneider switch

     






       (1) controller panel

      (2) controller can be change for SYNTEC,GSK,LNC and so on

      (3) controller can be set in English

      (4) we have JSTOMI and JSWAY two logos.

(1) all cnc lathe machine tool with HTS CE certificate

(2) all cnc lathe machine tool with ECM CE certificate

Packing : in wooden case like follow

Packing size(mm)